Description
Spirit level for aligning target optics:
Suitable: for all riflescopes with tube diameter 30 mm to 35 mm
Mounting a scope
As very few firearms come with built-in telescopic sights (military designs such as Steyr AUG, SAR 21 and H&K G36 being exceptions) mounting a scope to a firearm requires additional equipment. Equipment is available to mount scopes on most production firearms. A typical scope mounting system consists of two parts, the scope base and the scope rings. By picking the appropriate combination of scope base to fit the firearm and scope rings to fit the scope, a wide range of scopes may be mounted to most firearms. With the appropriate combination of adjustable scope bases and scope rings it is also possible to mount several telescopic sights on the same gun to make the gun more versatile. However, it is important to take into consideration whether or not a gun is particularly hard to mount. If it is or if a gun is intended for long-range shooting, it could be that the length of vertical adjustment range is smaller than required. This can be solved with the help of a vertically canted base or canted rings. Typical cant angles offered by mounting components manufacturers are 20 and 30 MOA.
Scope mounts/scope rings, a kind of Weaver Rail Mount, is a system to connect telescopic sights, tactical flashlight and other accessories to rifles, shot guns, pistols, and crossbows. It uses a pair of parallel rails and several slots perpendicular to these rails.
Canis Latrans’ scope mounting systems are engineered to uphold the precision, strength and good looks designed into every Canis Latrans’ riflescope. Choose from S-Series steel or A-Series aluminium rings and bases, mounts for the BLACK riflescope line. All are held in incredibly tight tolerances.
Scope base
The base is attached to the rifle, usually with screws, and is often designed to have a low profile, and to allow use of the iron sights if the scope is not present. Some manufacturers provide integral base on many of their firearms; an example of such a firearm is the Ruger Super Redhawk revolver. The most commonly encountered mounting systems are the 3/8 inch (9.5 mm) and the 11 mm dovetail rails (sometimes called tip-off mounts), commonly found on rimfires and air guns, the Weaver type base and the STANAG 2324 (MIL-STD-1913 “Picatinny rail”) base. Ruger uses a proprietary scope base system, though adapters are available to convert the Ruger base into Weaver type base. Scope base and mounting systems are also manufactured in Europe. Specialized manufacturers offer an elaborate program of mounting solutions for many different guns. Many European gun manufacturers also developed and offer proprietary scope base systems for their guns, for example Sako has tapered dovetails and Tikka uses 16 mm dovetail.
Scope ring sizes
In addition to needing the right type of connector to attach to the desired base on the firearm (e.g. a picatinny rail), a scope mount needs to have a way to mount to the scope. Ring mounting is the most common method, and the ring size must be chosen according to the size of the outer main tube of the optic. Scopes with a larger main tube have more room for the erector assembly, thereby allowing a design with increased elevation adjustment.
The three most common standards are:
1 in (25.4 mm), offers a lower production cost compared to 30 mm main tubes, but allows for less elevation adjustment than what is possible with a 30 mm tube
30 mm, the most common main tube standard today, and therefore has the widest range of mounting solutions
34 mm, which has become a new standard main tube size for tactical rifle scopes where more elevation is needed than with a standard 30 mm tube
Some less common standards are:
0.75 in (19.05 mm), seen on some very old models[citation needed]
22 mm
26 mm
35 mm, a rare tube size which only is seen on some current models from Romanian IOR and U.S.-based Vortex and Leupold
36 mm, only used on some newer scope models by Zeiss and Hensoldt
40 mm, only used on some scopes made by Romanian IOR and the new Swarovski dS scope
Rings are also available in a variety of heights and materials. Ring height is chosen to place the scope high enough to clear the firearm, and at a height comfortable for the shooter.
Riflescope Ring Sprit level 30mm Ø CL24-0182
Spirit level for aligning target optics:
Suitable: for all riflescopes with tube diameter 30 mm to 35 mm
Mounting a weapon light
Shooter can also mount some weapon light to the rifle by using the scope rings.
Product information:
- Model: CL24-0182
- Material: cast steel
- Finish & Coating: Hard oxide
- Colour: Black
- Length:20 mm
- Width:44 mm
- Centre height: 28.5 mm
- Weight: 215 gr. 2 pcs
- Impact: 1000G
- Diameter: 30mm
- Rail: 21.2mm
- Clamping way: Common dismantling
- 2 pcs and key
