Description
The sturdy LED warning light case made of plastic includes 8x warning lights in the desired colours: blue, yellow, red switchable. All warning lights can be charged simultaneously directly from the case using the 12V or 220V connection cables supplied. The case is very robust and compact, can be easily stored and is quickly ready for use. The warning lights can be quickly laid out on the ground and also be adhered to metal by using magnet. After taking out the carrying case, they are immediately ready for use and start flashing. With one manipulation, the colours as well as the modes can be switched and synchronised immediately.
It can be connected to a 220V or 12V power source via a socket in the middle of the case. The case is also a 8-way charger, the 12V or 220V connection cable supplies the case with the necessary power.
The bright warning lights work in the dark, in rain, fog or smoke, thus increasing safety in emergencies. With the 6x different light / flashing modes, a robust housing made of hard rubber, 100% waterproof, these warning lights will not let you down even in continuous rain. The warning lights are all equipped with a strong magnet that adheres to all metal surfaces.
Product Information:
- Description: LED warning lights synchronous / switchable
- Weight: 3.2 kg case with 8x warning lights
- Lamp weight: 290 gm.
- Case contents: 8x warning lights
- Diameter of the lights: 11 cm
- Housing made of super strong hard rubber
- Colours / modes switchable: red, blue, yellow
- With 6x different switchable lighting programmes/flashing sequences
- Rapid deployment
- Waterproof and therefore floatable (suitable for skippers and divers)
- With strong adhesive magnets
- High visibility by day, night and above water
- The charging socket is in the middle of the case.
- The case can be charged directly via USB as well as via a 220 V socket or
- In the car via the cigarette lighter with the supplied car socket.
- Charging cable included in delivery: 12V charging cable / 220V charging cable USB / car socket
Installing:
- There are 4 battery charge indicator lights installed on each side of the case.
- When the light is in front of you, the left control button is No. 4 and the right control button is No. 5. in the description.
- – Take the lights out of the charging case and place it on the floor.
- A green light appears and the lights start flashing.
- – Press button 4 to switch between the 6 flashing modes.
- – Press button 5 to switch between the 3 colour modes.
- – Line up the lights on the ground, they will automatically synchronise with the flashing mode of the previous light.
- – Press the buttons of any light to change the 3x flashing colour modes.
- – When you have set the light to the selected flashing and colour mode, put all light back into the carrying case with the right side LED flashing outwards. As soon as the lights are inserted in the case, the flashing stops.
- The lights are held in the case by magnets and are automatically recharged.
- The case doesn’t always have to be connected to the mains to charge.
Battery charge:
- Connect the charging cable to the socket and connect the charger to a power supply (AC or DC), depending on which charger is used.
- The 4x charging indicators on both sides of the case light up: Red light = charging in progress. Green light = fully charged.
